Model/Brand/Package
Category/Description
Inventory
Price
Data
-
Category: resistanceDescription: 250 W The 500 W Vishay Sfernice RPS series thick film non inductive resistor is used for heat sink installation, especially suitable for harsh pulse applications. The shell opening is easy to install and optimize, and the low heat radiation is installed on the heat sink. Power consumption at 70 ° C: | RPS 250DH: 250W ------- | RPS 500DH: 500W Tolerance: | ± 5% Temperature coefficient: | ± 250 ppm/° C (R | ± 150 ppm/° C (R1 Ω) Maximum service voltage: | 5 kV Effective value Thermal resistance: | RPS 250DH: 0.22 ° C/W | RPS 500DH: 0.11 ° C/W Dielectric stiffness: | 14 kV Effective value Operating temperature: | -55 ° C to+125 ° C # # # Non inductive - Panel installation # # # Non inductive - Heat sink can be mounted on almost non inductive, thick film power resistor, designed for direct connection of heat sink, suitable for installation in positions that require easy connection in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of4027
-
Category: resistanceDescription: VISHAY RCH50SR6800J Through Hole Resistor, 0.68Ω, 1.285kV, 5.5W, ± 5%5166
-
Category: resistanceDescription: VISHAY RCH25SR4700J Through Hole Resistor, 0.47Ω, 550V, 4W, ± 5%, RCH Series8205
-
Category: resistanceDescription: Res Cermet POT 1KΩ 20% 3W 1(Elec)/1(Mech)Turn 6mm (19.7 X 45mm) Solder Lug Panel Mount Bulk8249
-
Category: resistanceDescription: Rotary potentiometer, metal ceramic, 10 kohm, 1 turn, linear, 3 W, ± 10%, PE30 series9211
-
Category: resistanceDescription: Res Cermet POT 10KΩ 20% 0.5W(1/2W) 1(Elec)/1(Mech)Turn 6mm (12.5 X 13.1mm) Pin Panel Mount Box9706
-
Category: resistanceDescription: Res Cermet POT 4.7KΩ 10% 1W 1(Elec)/1(Mech)Turn 6mm (12.5 X 13.1mm) Solder Lug Panel Mount Box4790
-
Category: resistanceDescription: Res Cermet POT 47KΩ 20% 1W 1(Elec)/1(Mech)Turn 6mm (12.5 X 13.1mm) Pin Panel Mount Box5721
-
Category: resistanceDescription: Res Cermet POT 1M Ohm 20% 3W 1(Elec)/1(Mech)Turn 6mm (19.7 X 63mm) Solder Lug Panel Mount Bulk1786
-
Category: resistanceDescription: WELWYN WH200-R10JI 功率电阻, 200W, 5%, 0R162431+$193.982010+$188.921650+$185.0420100+$183.6925200+$182.6804500+$181.33101000+$180.48762000+$179.6442
